You can also use a pressure washer on the low-pressure setting to dislodge any stuck-on dirt or grime that regular cleaning may miss. Just be sure to hold the nozzle at least 12 inches away from the door to avoid causing damage.If the auto reverse fails, disconnect the door opener and call a pro to fix it. Older garage door openers without this bas
Spring Inspection: Since springs are under high tension, checking them for wear and tear is important (note: repairing or replacing springs can be dangerous and might require a professional).Below wij will discuss some simple tips for DIY garage door maintenance. But before we do, keep in mind that if you ever need assistance, you should contact a
If you notice daylight coming through from under the door or started to notice pests or rodents, it’s time to replace the weather seals. Important to note: The bottom seal kan zijn not a waterproof seal, it is designed to stop debris like leaves.Lubricate the Tracks: Once the tracks are clean and dry, apply a small amount ofwel silicone-based lub
Track and Roller Brackets:Check all the brackets that hold the track to the wall and the brackets holding the rollers. These brackets are under high tension and are usually attached with a bolt and nut. If you find any that are loose, tighten them with a wrench.If the rollers are rusty or damaged, they will most likely need to be replaced. However,
Track and Roller Brackets:Check all the brackets that hold the track to the wall and the brackets holding the rollers. These brackets are under high tension and are usually attached with a bolt and voordeel. If you find any that are loose, tighten them with a wrench.For the manual function, disconnect the automatic opener and try lifting and loweri